MICROMAG 20

Magazine for bar diameters of 0.8–23 mm.

It operates on the principle of a single-stage feed. The pusher does not tend to swing inwards, which allows for very economical material bar changeover times and a particularly stable process for drawing out even very thin material bars. The lateral material storage is also fitted with swivelling pilgrim step separation to enable material bars with very small diameters to be separated out optimally and securely transferred into the guide channel.

Area of application

Sliding headstock lathes with up to 23 mm nominal throughput gap, which process the smallest diameter ranges permanently or occasionally.

Features

  • Swivelling pilgrim step separation for the optimum separation of very small material bar diameters
  • Short material bar loading time due to single-stage feed principle
  • 5 mm guide channel with enclosed construction for the secure feed of material bars with very small diameters
  • Fast, simple changing of the inserts for efficient adaptation of the guide channel to different material diameters

Turn your device to Landscape to see Specifications table.

TECHNICAL SPECIFICATIONS
1600mm
3200mm
4200mm
Bar diameter
mm
0.8 - 23
0.8 - 23
0.8 - 23
Loading capacity
mm
200
200
200
Remnant piece length (max)
mm
320
320
320
Loading time (approx.)
sec
-
22
-
Feed speed
mm/s
0-300
0-300
0-300
Return speed
mm/s
0-600
0-600
0-600
Power requirement
kw
1,5
1,5
1,5
Compressed air connection
bar
6
6
6
Weight without oil
kg
450
600
800